Jet Works Flow Control Valve 1/4 inch pro

Description

This valve has been designed to prevent water flow to the water box at idle and just off idle engine speeds. It allows the craft to be more responsive off the line and around the turns. Even completely stock watercraft show an improvement in throttle response.
In a race start situation, the craft is under a slight load awaiting the start. Water fills up the water box and exhaust exit hoses. Upon sudden acceleration all this water must be forced out quickly before full exhaust flow can occur. During this time the craft feels a slight hesitation and/or sluggish, especially when the water box is mounted up front and has a rear exhaust. The flow control valve allows the box to dry out for better throttle response through the turns as well.
Average acceleration improvement of 10 feet over a non-equipped model in the first 50 feet
Completely hand adjustable
Pressure can be tested with a pop-off gauge
Comes in a preset kit
All stainless internal parts
IJSBA race legal

Also used to restrict water into certain areas of the engine for tuning purposes.

This is not the typical flow control valve used for exhaust systems, for that application see

http://www.thrustinnovations.com/exhaust-c-22_23/pro-flow-control-valve-adjustable-p-389.html